Overview

This is the FreeRTOS BSP (Board Support Package) and the development environment for the STM32H7 System-On-Module (SOM) and Starter Kit, release 1.1.0.

Hardware Platform

Refer to the the following page for detailed information on the hardware items included in the Starter Kit: STM32H7 SOM Starter Kit.

Release Images

Release images for this software release can be downloaded from the following location:
freertos-stm32h7-1.1.0.tgz (requires registration and login).

Setting Up Kit and Development Host

Refer to the the following page for detailed information on how to build and use this software release: https://emcraft.com/products/1090#freertos.

Supported Features

The following list provides a summary of the features and capabilities of this release of the STM32H7 BSP:

• U-Boot firmware:
  • U-Boot v 2019.04-rc3;
  • Serial console command interface with various setup, test and maintenance commands;
  • Environment variables allowing customisation of a unit;
  • Sophisticated RTOS auto-boot sequence;
  • Partitioning and management of external Flash;
  • Initial installation of RTOS images to external Flash.
• FreeRTOS:
  • FreeRTOS v.9.0.0;
  • STM32Cube_FW_H7 v1.3.0 HAL;
  • Device drivers for key I/O interfaces of the STM32H7 SOM.
• Development environment:
  • Linux-hosted cross-development environment.

Software Manifest

Repo	Link	Hash	Tag
STM32Cube	https://gitlab.com/emcraft/STM32H7/STM32CubeH7.git	b9816a842a	emcraft-h7-1.1.0
U-Boot STM32H7	https://gitlab.com/emcraft/STM32H7/u-boot-upstream.git	b41e2dbf49	emcraft-h7-1.1.0

New Functionality

The following is a summary of the changes in 1.1.0. since the last release 1.0.0:

Issue Key	Summary
RM6589	Productise FreeRTOS BSP and software workflows