Overview
This is the Linux BSP (Board Support Package) and the development environment for the STM32H7 System-On-Module (SOM) and Starter Kit, release 2.6.1.
The BSP provides a software development environment for evaluation and development of Linux (uClinux) on the Cortex-M7 processor core of the STM32H7 microcontroller using the Emcraft STM32H7 SOM Starter Kit as a hardware platform.
Supported Features
The following list provides a summary of the features and capabilities of this release of the STM32H7 BSP:
- Linux:
- Kernel v.6.1.28;
- Serial Linux console;
- Ethernet device driver and Linux TCP/IP networking (ping, NFS, Telnet, FTP, NTPD, etc);
- Clock driver;
- pinctrl driver;
- busybox v1.35.0;
- POSIX pthreads;
- Hardened exception handling; an exception triggered by a process affects only the offending process.
- U-Boot firmware:
- U-Boot v 2019.04-rc3;
- Serial console command interface with various setup, test and maintenance commands;
- Environment variables allowing customisation of a unit;
- Sophisticated OS auto-boot sequence;
- Partitioning and management of external Flash;
- Initial installation of Linux image to external Flash.
- Development environment:
- Linux-hosted cross-development environment;
- 10.3-2021.10 Arm Embedded Toolchain is used for development of U-Boot, Linux;
- 11.3 GNU toolchain is used for development of user-space applications;
- ELF / dynamic linking supported;
- Debugging of user-space applications with cross-GDB;
- Hardware FPU enabled in the toolchain and kernel;
- mkimage tool used by the Linux kernel build process to create a bootable Linux image.
Software Manifest
New and Changed Features
The following is a summary of the changes in release 2.6.1, as compared to release 2.6.0:
- Fix bug: Controlling LEDs from user space doesn't work in uClinux 2.6.0 for STM32H7 SOM.
ID: STM32H7-22.
- Fix bug: The "next" command does not work in gdb 11.2.
ID: RM 7052.
Known Problems and Limitations
This section lists known problems and limitations of this release:
- Managing U-Boot environment from Linux is not supported.
ID: STM32H7-17.
- Switch to Low Power Mode doesn't work in uClinux 2.6.0 for STM32H7 SOM.
ID: STM32H7-21.
|