This note explains how to load images to the target via Ethernet. With an Ethernet connection available, U-Boot can load images from a TFTP host quickly and easily. This is the development and software manufacturing option one wants to have available with U-Boot and Linux.
The download procedure is based on the tftpboot command provided by the U-Boot command interface. tftboot implements a download capability over Ethernet using the TFTP protocol and has the following synopsis:
tftpboot <file> [<load_addr>]
If you do not specify a load address, then the value will be taken from the loadaddr environment variable. On the K70/K61 SOM, loadaddr is set as follows, placing the download buffer into the on-module LPDDR:
K70-SOM> print loadaddr
loadaddr=0x08007fc0
The MAC address of the Ethernet interface is defined by the ethaddr environment variable.The IP address of the board is defined by the ipaddr U-Boot environment variable. The TFTP server IP address is defined by the serverip U-Boot environment variable. Make sure you define these environment variables to values that make sense for your LAN and save them in the on-module NAND Flash:
K70-SOM> setenv ethaddr C0:B1:3D:88:88:89
K70-SOM> setenv ipaddr 172.17.6.136
K70-SOM> setenv serverip 172.17.0.1
K70-SOM> saveenv
Saving Environment to NAND...
Erasing Nand...
Erasing at 0x60000 -- 100% complete.
Writing to Nand... done
K70-SOM>
Once the transmission using tftpboot finishes, the file will be in memory at the specified load address. The loadaddr environment variable will automatically be set to the address the tftpboot command used. The filesize environment variable will automatically be set to the number of bytes transferred during the load operation.
Then you are free to do whatever you like with the loaded image. You can boot Linux from the image (assuming it is a Linux uImage file), copy it to some other place (for instance, NAND Flash), display the memory, etc.
One typical command sequence involving tftpboot is defined in the netboot environment variable, which by default is set in U-Boot as follows:
K70-SOM> print netboot
netboot=tftp ${image};run args addip;bootm
What netboot does is load from a TFTP host a file defined by image (the tftp command), then add the TCP/IP related parameters to the kernel command string (addip), and finally boot Linux from the just loaded image (bootm).
Let's use netboot to boot Linux via TFTP from the sample Linux image (networking.uImage) included in the Emcraft software distribution. Copy networking.uImage to the TFTP directory on the host and then from U-Boot on the target set the image environment variable to point to the image:
K70-SOM> setenv image vlad/networking.uImage
K70-SOM> savee
Saving Environment to NAND...
Erasing redundant Nand...
Erasing at 0xe0000 -- 100% complete.
Writing to redundant Nand... done
K70-SOM> run netboot
Using FEC0 device
TFTP from server 172.17.0.1; our IP address is 172.17.6.46
Filename 'vlad/networking.uImage'.
Load address: 0x8007fc0
Loading: #################################################################
#################################################################
#############################
done
Bytes transferred = 2325504 (237c00 hex)
## Booting kernel from Legacy Image at 08007fc0 ...
Image Name: Linux-2.6.33-arm1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2325440 Bytes = 2.2 MB
Load Address: 08008000
Entry Point: 08008001
Loading Kernel Image ... OK
OK
Starting kernel ...
Linux version 2.6.33-arm1 (psl @ocean.emcraft.com) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-189) ) #5 Thu Dec 12 14:18:44 +0400 2013
...
init started: BusyBox v1.17.0 (2013-12-12 14:16:57 +0400)
~ # ps
PID USER VSZ STAT COMMAND
1 root 360 S init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [events/0]
5 root 0 SW [khelper]
6 root 0 SW [async/mgr]
7 root 0 SW [sync_supers]
8 root 0 SW [bdi-default]
9 root 0 SW [kblockd/0]
10 root 0 SW [khubd]
11 root 0 SW [rpciod/0]
12 root 0 SW [kswapd0]
13 root 0 SW [nfsiod]
14 root 0 SW [mtdblockd]
20 root 367 S /bin/hush -i
21 root 348 R ps
~ #
Here are some troubleshooting tips, in case tftpboot does not work for you from U-Boot:
- As trivial as it sounds make sure that the board is connected to the LAN with an Ethernet cable.
- Suppose you are still not getting your file from the TFTP server. It is possible that the problem is on the host side - you must set up a TFTP server correctly. Just google for "how to set up a tftp server" and follow the advice from some top articles.
- Make sure you have copied a file you are trying to download to the TFTP server directory on the host.
- Disable the firewall on the host since get enabled, it will block TFTP requests from the target.
- On the target, make sure that you have set ipaddr and serverip correctly. Check ethaddr and make sure that you don't have another embedded board (eg. another K70/K61 SOM) configured for the same MAC address.
